Technical InformationSpeedflow – unvented mains pressure
Unvented water heaters are fast becoming the option of choice for small commercial applications since they offer high performance, multiple sink capability and allow the use of regular taps.
Stock Codes: SF05K, SF10K, SF15K
- Available in 5,10 and 15 litre capacities
- Mains pressure – undersink unit
- Superior reliability and multiple outlet performance
- Uses conventional taps, including mixers
- 2.0kW stainless steel flange element
- Manual re-settable thermal cut out
- Wall mounting or floor standing
- Pressure relief valve included
| Application |
Suggested Product |
| 1 basin |
SF05K |
| 1-2 basins |
SF10K |
| 2-3 basins |
SF15 |
Powerflow – unvented wall mounted
The NEW Powerflow unvented multipoint water heater is a high performance mains pressure unit which can be used for many applications. It is the ideal solution for light industrial, commercial and light domestic hot water requirements.
The Powerflow can be sited at any convenient location above or below the outlets to be served. An unvented accessory kit is supplied with every unit which contains all you need for installation.
Stock Codes: PF30L, PF50L, PF90L
- Available in 30, 50 and 90 litre capacities
- Stainless steel tank with 3 year warranty
- Mains pressure
- Uses conventional taps including mixers
- 3kW element and factory fitted T&P valve
- Unvented accessory kit included
- Regulation thermostat adjustable to 65°C
- Highly efficient thermal insulation
Application
|
Suggested Product
|
| 3-5 basins |
PF30L |
| 4-6 basins |
PF50L |
| 1 bed/ 1 shower/ bath |
PF90L |
Handyflow – oversink vented
The Handyflow is a simple to install traditional vented over sink water heater. With a neat design and supplied complete with tap and spout, the Handyflow offers an effective, practical solution whenever time and simplicity are the key priorities. The Handyflow incorporates a thermal cut-out that can be re-set rather than requiring to be replaced. The unit simply needs to be switched off and it will automatically re-set itself. This feature is particularly useful when the heater is likely to be drained frequently (e.g. when fitted in Portable Buildings).
Users with a requirement to serve more than one sink or to use regular taps should consider the Speedflow Unvented water heater as an alternative to the Handyflow
Stock Code: HF05LPQ
- The complete solution for a single outlet
- Adjustable thermostat
- 5 litre tank, 2kW element
- Supplied with inlet tap and spout
- Cable pre wired
Handyflow – undersink vented
Undersink vented units are attractive because installation is very simple and no specialist accessories are needed. The HandyflowSlimline vented under sink water heater retains the ease of installation of traditional vented over sink equivalents but has the additional benefits of being hidden below the sink giving less visual impact and including a vented mixer tap rather than a spout and cold water tap. The fact that the HandyflowSlimline Vented Undersink comes as a complete package and the user does not need to purchase a separate cold tap makes it an economic alternative to the Handyflow Vented Oversink. The vented mixer tap supplied with the water heater comes with flexible hose for ease of installation and can be purchased separately if required.
It is normal for the vented hot water tap to drip slightly during the heating cycle, caused by the water expanding as it heats up.
Stock code: HV05VC
- 5L Capacity
- complete with vented tap and hose
- external temperature control
- 2kW element
- white corrosion proof case
- safety re-settable thermal cut out
- suitable for single outlet only
- wall bracket included for fast installation
Inline- Instantaneous
The Inline is a compact multipoint mains pressure instantaneous water heater that can be connected to one or more outlets. It is ideal for undersink mounting or where space is at a premium.
Stock Codes: IN95A (9kW), IN120 (12kW)
- 9.5 and 12kW units
- 3 heat settings
- Mains pressure
- Spray head taps recommended
- Simultaneous usage not recommended
Microboil – boiling water unit
Standard and Premier water unit
The Microboil is an advanced boiling water unit for hot drinks in the workplace. It is available in sizes ranging from 2 to 16 Litres (12 to 100 cups).
Sophisticated electronics make sure that all Microboil units will automatically supply boiling water 24 hours a day, 365 days a year - even when the unit is automatically re-filling after heavy usage.
Stock Codes
Standard: MBS3, MBS6, MBS8
Premier: MBP3, MBP6, MBP8
Key features of the Microboil Premier include:
- 3 year on-site warranty
- Size range of 2,3,6,8,16 litre
- Compact design
- Heavy duty catering tap with lock on option for hands free filling
The Microboil Standard shares the same robust design as the premier but in order to provide a cost competitive alternative it has a one year on-site warranty.
Apollo – vented cistern combination unit
The Apollo offers enough storage capacity to serve a number of sinks yet is very simple and reliable in design. Connected directly to the mains, the Apollo features hot and cold water tanks and is fitted with an anode for long life in aggressive water conditions.
Flow rates are height determined and this unit needs to be wall mounted at the highest level. A minimum distance of 1 metre is needed between the bottom of the Apollo unit and the outlet to be served. If this is difficult to achieve then the Powerflow mains pressure unit should be considered.
Stock Codes: AP25LM, AP50LM, AP75LM, AP100LM
- 3kW element
- Height for header tank needed
- Flow rates dependent on height
- Powerflow is a mains pressure alternative
|
